The Story
Active Constituents:
Magnesium 0.45 % W/V
Calcium 0.75 % W/V
Sulphur 0.45 % W/V
Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.;
Iron 0.024 % W/V, Copper 0.017 % W/V
Manganese 0.017 % W/V, Zinc 0.006 % W/V
Boron 0.008 % W/V
Molybdenum 0.00023 % W/V
Ā
Main Features:
*Ā A very effective mix of mineral nutrients and state-of-the-art organic chelates.
*Ā Suitable for all growing media & hydroponic systems.
*Ā Remarkably stable even in extreme climatic conditions.
*Ā Capable of producing exceptionally rapid plant growth.
*Ā Provides total availability of all nutrient requirements.
*Ā Dual chelator - acid and alkaline.
*Ā The fully chelated micro-nutrients are boosted to higher levels than other mixes.
*Ā The concentrated formula provides high potency at low cost.
*Ā Stunning results assured when used correctly.
*Ā Manufactured in Australia.
INSTRUCTIONS:
Always use equal amounts of A and B.Ā Never mix A and B in concentrated form.
Shake bottles before use.
To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank.Ā Repeat for Part B.Ā Then top up the tank to full volume.Ā The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.
1,300 ppm (parts per million) is equal to
1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.
This strength is suitable for most purposes.
In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.
|
Tank/Litres |
Part A |
Part B |
|
10 |
50ml |
50ml |
|
50 |
250ml |
250ml |
|
100 |
500ml |
500ml |
|
200 |
1000ml |
1000ml |
Description
Active Constituents:
Magnesium 0.45 % W/V
Calcium 0.75 % W/V
Sulphur 0.45 % W/V
Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.;
Iron 0.024 % W/V, Copper 0.017 % W/V
Manganese 0.017 % W/V, Zinc 0.006 % W/V
Boron 0.008 % W/V
Molybdenum 0.00023 % W/V
Ā
Main Features:
*Ā A very effective mix of mineral nutrients and state-of-the-art organic chelates.
*Ā Suitable for all growing media & hydroponic systems.
*Ā Remarkably stable even in extreme climatic conditions.
*Ā Capable of producing exceptionally rapid plant growth.
*Ā Provides total availability of all nutrient requirements.
*Ā Dual chelator - acid and alkaline.
*Ā The fully chelated micro-nutrients are boosted to higher levels than other mixes.
*Ā The concentrated formula provides high potency at low cost.
*Ā Stunning results assured when used correctly.
*Ā Manufactured in Australia.
INSTRUCTIONS:
Always use equal amounts of A and B.Ā Never mix A and B in concentrated form.
Shake bottles before use.
To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank.Ā Repeat for Part B.Ā Then top up the tank to full volume.Ā The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.
1,300 ppm (parts per million) is equal to
1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.
This strength is suitable for most purposes.
In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.
|
Tank/Litres |
Part A |
Part B |
|
10 |
50ml |
50ml |
|
50 |
250ml |
250ml |
|
100 |
500ml |
500ml |
|
200 |
1000ml |
1000ml |
