The Story
Active Constituents:
Nitrogen 1.5% W/V
Phosphorous 2.6 % W/V
Potassium 8.6 % W/V
Sulphur 2.0% W/V
Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.
Iron 0.033%W/V, Copper 0.017% W/V, Manganese 0.017%, Zinc 0.006%,
Main Features:
* A very effective mix of mineral nutrients and state of the art organic chelates.
* Suitable for all growing media & hydroponic systems.
* Remarkably stable even in extreme climatic conditions.
* Capable of producing exceptionally rapid plant growth.
* Provides total availability of all nutrient requirements.
* Dual chelator - acid and alkaline.
* The fully chelated micro-nutrients are boosted to higher levels than other mixes.
* The concentrated formula provides high potency at low cost.
* Stunning results assured when used correctly.
Manufactured in Australia.
INSTRUCTIONS:
Always use equal amounts of A and B.
Never mix A and B in concentrated form.
Shake bottles before use.
To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank. Repeat for Part B. Then top up the tank to full volume. The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.
1,300 ppm (parts per million) is equal to 1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.
This strength is suitable for most purposes.
In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.
|
Tank/Litres |
Part A |
Part B |
|
10 |
50ml |
50ml |
|
50 |
250ml |
250ml |
|
100 |
500ml |
500ml |
|
200 |
1000ml |
1000ml |
Description
Active Constituents:
Nitrogen 1.5% W/V
Phosphorous 2.6 % W/V
Potassium 8.6 % W/V
Sulphur 2.0% W/V
Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.
Iron 0.033%W/V, Copper 0.017% W/V, Manganese 0.017%, Zinc 0.006%,
Main Features:
* A very effective mix of mineral nutrients and state of the art organic chelates.
* Suitable for all growing media & hydroponic systems.
* Remarkably stable even in extreme climatic conditions.
* Capable of producing exceptionally rapid plant growth.
* Provides total availability of all nutrient requirements.
* Dual chelator - acid and alkaline.
* The fully chelated micro-nutrients are boosted to higher levels than other mixes.
* The concentrated formula provides high potency at low cost.
* Stunning results assured when used correctly.
Manufactured in Australia.
INSTRUCTIONS:
Always use equal amounts of A and B.
Never mix A and B in concentrated form.
Shake bottles before use.
To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank. Repeat for Part B. Then top up the tank to full volume. The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.
1,300 ppm (parts per million) is equal to 1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.
This strength is suitable for most purposes.
In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.
|
Tank/Litres |
Part A |
Part B |
|
10 |
50ml |
50ml |
|
50 |
250ml |
250ml |
|
100 |
500ml |
500ml |
|
200 |
1000ml |
1000ml |
